-
Service SupportEmail:
-
Products & Solutions
Service SupportEmail:
-
Service SupportEmail:
CMS
The vehicle's surrounding environment is collected in real time using the on-board camera, and the in-car display provides the driver with a clearer and smarter view.
● Capture the side and rear images of the vehicle through a wide-angle camera to eliminate blind spots.
● The display resolution is usually 1080p or higher, and clarity can be enhanced through image enhancement technology at night or in low light.
● Not affected by the window frame, rear passengers or C-pillar structure; automatically switch the viewing angle according to the vehicle speed or steering signal; through AI ISP, it is clearer than traditional rearview mirrors in scenarios such as at night and in tunnels.
● The camera is equipped with a hydrophobic coating or heating function, and the electronic rearview mirror can optimize the picture through algorithms.
● When combined with blind spot monitoring (BSIS) and lane change assistance (LCA), warning icons are superimposed on the display; Also it supports pedestrian/bicycle recognition.
● Electronic rearview mirrors are 30% to 50% smaller in size than traditional rearview mirrors, which can reduce wind resistance (about 3% to 5%) and decrease wind noise during high-speed driving.
● When towing a recreational vehicle or truck, the electronic rearview mirror can provide a complete view through the rear camera.
Share to
Product Details
Features
◆ 1 standard CAN communication interface;
◆ Support 2 channels of LVDS input, 1 channel of LVDS output, 1 channel of AHD output
◆ Meet GB/T 15084 and R46 standards
◆ Camera volume is 60% smaller than traditional mirror, reducing wind noise, thereby reducing 1-2% fuel consumption and power.
◆ Increase the driving field of view and reduce blind spots.
◆ Reduce the driver's head turning angle.
◆ In bad weather and low-light environments, the visual restoration is better.
◆ Automatically mark the blind spot vehicle when changing lanes (linked with BSD system).
◆ Superimpose the track line when reversing (replace some AVM functions).
◆ Simultaneous recording with driving recorder.
◆ Applicable for truck, bus etc.
Specifications
| Item | Parameters | |
| Controller | Screen Size | 12.3" / 14.5" |
| Contrast | 12.3": 1,200:1 14.5": 1,400:1 | |
| luminance | 1,200 cd/㎡ | |
| Angle of Visibility | Left/Right/Up/Down 88°/88°/88°/88° | |
| Resolution | 1920 (W) x RGB x 720 (H) | |
| Cold Start Time | <1.2s | |
| Operating Voltage | DC9~36V | |
| Dark Current | 1mA | |
| Operating Current | ≤1.5A | |
| Image Input | 1-2 channel LVDS video input | |
| Recording Method | Continuous recording, segmented storage, circular video | |
| Storage Device | SD card (Max support 1T) | |
| Storage Temperature | -40℃~95℃ | |
| Operating Temperature | -40℃~85℃ | |
| IP Rating | IP52 | |
| Apparent Dimension | 12.3": H299*W120*D40mm 14.5": H353*W140*D33mm | |
| Camera | Sensor Size | 1/2.56 inch |
| Sensor Resolution | 1920x1536 | |
| Angle of View | H120±3°, V95±3° | |
| Pixel Size | 3μmx3μm | |
| Dynamic Range | ≥140B | |
| Frame Rate | 60fps | |
| Signal-to-Noise Ratio | ≥41.6dB | |
| Minimum Illumination | 0.01Lux | |
| Exposure Mode | Automatic | |
| Gain Control | Automatic | |
| Aperture Value | 2.2±5% | |
| Operating Temperature | -40℃~95℃ | |
| Storage Temperature | -40℃~105℃ | |
| IP Rating | IP69 (Installed under the windshield, no special waterproof design) | |
Keyword:
Related Products
Assisted Driving
Compulsory Standard Application
Abroad
-
R158 AHD Reverse Camera
The R158 rear-view camera is an essential safety aid in modern vehicles. By installing a high-resolution camera at the rear of the car, it can detect pedestrians or any other obstacles behind the vehicle and alert the driver when potential hazards are identified, thereby reducing rear-end accidents.<br> ● When the driver engages the reverse gear (R gear), real-time video images of the vehicle's rear are automatically displayed on the in-vehicle display screen.<br> ● When in reverse gear, the system automatically activates to detect moving objects (such as pedestrians and cyclists) entering the vehicle's rear blind area.<br> ● When a risk is detected, a visual or auditory warning is issued to the driver.
-
BSIS-LVDS
-
BSIS/MOIS
-
DDAW/ADDW
Intelligent Cockpit
In-vehicle camera
-
CVBS Reverse Camera
-
2-in-1 camera
-
Fatigue Driving Camera
-
New GB Cab Monitoring Camera
-
AHD Reverse Camera
The use of AHD technology ensures this reverse parking camera delivers exceptional image quality. It outputs a high-definition video signal, allowing drivers to clearly see what's behind their vehicle when reversing. It accurately captures details both day and night.
-
LVDS Surround-view Camera
Contact Information
Tel: 0592-6021007
Mobile: 180-5988-5116
Email: sales@wi-see.com
Add: A601-603,C301-302 Qihang Building, No.31 Xinghu Road, Huli District Xiamen City, Fujian Province, P.R.China
Website: http://www.wi-see.com/
Social Media
Website
